Digital Monitoring Products, Inc. | 7800 Series Installation and Programming Guide 33
ADDITIONAL PROGRAMMING
Users can manually enter their user code into the keypad which then verifies the user code
and its authority with the panel. The 7873/7873H activates the on-board Form C relay
releasing a door strike or magnetic lock. To provide added flexibility, the keypad allows
connection of an external Wiegand output compatible reader.
Program a Credential
1. Access the User Menu by pressing CMD until MENU? NO YES displays, choose YES
and present your proximity credential to the reader or manually enter your user
code at the keypad.
2. Press CMD until USER CODES? displays.
3. Press any select key. Choose ADD.
4. At ENTER CODE, present the credential to the reader. The keypad works by
reading the user code from the data string sent by the access control reader.
To Next Page
Loading...
