36 7800 Series Installation and Programming Guide | Digital Monitoring Products, Inc.
END USER TRAINING
This section contains instructions on how users can arm and disarm their system, use
access control, and entry delay. All of the examples displayed assume that CLOSING CODE
is YES in panel programming.
For more information about using your system, refer to the appropriate system user
guides from DMP.com/guides:
Access the User Menu
1. In the Carousel Menu, select Keypad.
2. Tap CMD to advance to MENU? NO YES. Tap YES.
3. Enter your user code, then tap CMD.
4. Tap CMD to advance through the menu items. To enter a menu, tap any select area.
To Next Page
Loading...
