7000 Series Installation and Programming Guide | Digital Monitoring Products 1
GET STARTED
Thinline™ Series and Aqualite™ Series LCD keypads oer flexible features and functionality. Each keypad provides:
▶ Custom 16-character home or business name in the display
▶ Four 2-button panic keys
▶ AC Power/Armed LED
▶ 32-character display
▶ Backlit keyboard and DMP logo
▶ Internal speaker
▶ Red keyboard lighting in alarm conditions
▶ Simple harness connection to 4-wire keypad bus
▶ Optional backboxes for conduit or wall mount applications
Models 7070/A, 7073/A, 7170, and 7173
Provides four fully-programmable, Class B, Style A, supervised, power limited protection zones that can be
programmed for a variety of burglary and access control applications.
Models 7063/A, 7073/A, 7163, and 7173
Provides a built-in proximity card reader designed to read 125KHz proximity credentials.
Models 7073/A and 7173
Provides a door strike relay and allows Wiegand input from external card readers.
What’s Included
▶ One 7000 Series Keypad
▶ Icon Stickers
▶ Four screws (#6 x 1”)
▶ One Model 333 Suppressor
▶ Four 1k Ohm EOL resistors
What You’ll Need
▶ 5/64” (2.0mm) drill bit
▶ #2 Phillips screwdriver
Procedure
To install a 7000 Series Keypad, this guide walks you through these required steps:
1. Enter characters.
2. Install the keypad.
3. Program the panel.
4. Program the keypad.
5. Custom card format.
6. Test the keypad.
7. End user training.
To Next Page
Loading...
Need help?
General
