18
Keypad Mode
Configure the KEYPAD MODE for supervised or
unsupervised operation. Keypads with programmed zones
must be supervised and cannot share an address with
other keypads. Unsupervised keypads can operate together
sharing the same address. Zones cannot be used on
unsupervised keypads. To change the current setting, press
the select key under SUP or UNSUP. An asterisk appears
next to the selected option.
Unsupervised addresses cannot be used when Device
Fail Output has a programmed value other than zero.
Default Keypad Message
Enter a DEFAULT KPD MSG of up to sixteen characters to
appear at the top of the keypad display. Press any select
key to clear the current message and enter a new custom
display.
Arm Panic Keys
Use this option to configure the top row select key as
as two button panic keys. To enable or disable a panic
option, press the select key under the appropriate name:
PN (panic), EM (emergency), and FI (fire). Once the panic
option is enabled, an asterisk displays next to the selected
option(s).
KEYPAD MODE:
SUP * UNSUP
DEFAULT KPD MSG:
ARM PANIC KEYS:
*PN *EM *FI
Installer Options
To Next Page
Loading...
Need help?
General
