DMP Electronics XTLtouch User Manual

Digital Monitoring Products, Inc. | XTLtouch System User Guide 9
You can easily arm your system from your keypad’s home screen.
Choose to arm or instant arm, depending on your needs.
ARMING
1. On the home screen, press the
center of the shield icon and
release. This displays the ARMING
options screen.
2. Choose your arming type. The Exit
Timer screen displays and begins
counting down your programmed
exit time.
Note: To cancel arming your system
during the exit timer count down,
press ENTER CODE TO CANCEL.
The keypad screen displays. Enter
your User Code to stop the arming
process.
3. If any zones are faulted or
bypassed, the system displays those
zones. See Bypass Zones.
4. When the exit timer ends, the
keypad home screen displays with
the ARMED shield. Your system is
now armed.
INSTANT ARMING
1. On the home screen, press and
release the shield icon to open the
ARMING options screen.
2. Press INSTANT.
3. Instant arming bypasses the exit
timer and instantly arms the system.
BYPASS ZONES
If a problem exists on any zones, the zone
name and a brief description are shown
followed by OK BYPASS STOP.
• Press OK to force arm the zone(s)
before arming.
• Press BYPASS to bypass the zone(s)
before arming.
• Press STOP to stop the system from
arming. Correct the zone problem(s)
and then press OK.
Note: Panic, emergency, fire, flood detector,
and temperature sensor zones cannot be
bypassed.

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English