DMP Electronics XTLtouch User Manual

Digital Monitoring Products, Inc. | XTLtouch System User Guide 21
• If ARM ONLY displays, select
YES to restrict the user to
arming only. Select NO to
allow the user to arm the
system and access standard
level user menu options.
6. At the IN LOCKS? screen, choose
whether or not to send the user
code to all of your system’s Z-Wave
locks.
Note: This option is only available
for user codes 2-20. Once the user
code has been received by the lock,
entering it at the lock will lock the
door or unlock the door and disarm
the system depending on the user’s
privileges.
DELETING A USER CODE
1. From the home screen, access User
Codes from the carousel menu.
Enter your user code and press
CMD, then Press DEL.
2. Enter the user code number you
would like to delete and press CMD.
The system displays that the user
code has been deleted.
EDITING A USER CODE
1. From the home screen, access User
Codes from the carousel menu.
Enter your user code and press
CMD, then Press CHG.
2. Enter the user code number that
you would like to edit and press
CMD.
3. Press CMD to cycle through the
dierent parts of the user code.
Press a select area to edit a the
displayed part of the user code.

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English