DMP Electronics XTLtouch User Manual

Digital Monitoring Products, Inc. | XTLtouch System User Guide 29
ADDING A PERMANENT
SCHEDULE
Permanent schedules are used for automatic
arming and disarming and always occur at
the same time until you change or delete
them.
1. Access the user menu and press
CMD until SCHEDULES? displays.
Press any select area.
2. SUN MON TUE WED displays. Press
CMD to display THU FRI SAT. Select
a day of the week you would like to
create a schedule for.
3. OPENING TIME? displays. Press
CMD and enter the time you want
the system disarmed. Use a 12-
hour clock only (12:00 to 11:59) and
select AM or PM.
4. CLOSING TIME? then displays.
Press CMD and enter the time you
want the system to arm.
EXTENDING A SCHEDULE
Allows you to extend today’s programmed
closing time schedule.
1. Access the user menu and press
CMD until SCHEDULES? displays.
Press any select key or area.
2. The keypad displays PRM EXT OUT
FAV. Select EXT.
3. The keypad displays – : AM PM.
Enter in the new time for the
closing schedule to expire.

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English