DMP Electronics XTLtouch User Manual

24 XTLtouch System User Guide | Digital Monitoring Products, Inc.
TRANSFERRING Z-WAVE
DEVICE INFORMATION
Follow these steps to replace your Z-Wave
information with the information from
another system:
1. Access the user menu and press
CMD until ZWAVE SETUP? appears,
and then press any select area.
Press CMD to cycle through the
Z-Wave options and press XFER.
2. The system warns you that
transferring Z-Wave device
information deletes your existing
devices from the panel, and then
asks if you are sure you want to
continue the transfer. If you want to
proceed, press YES.
3. The system deletes your existing
Z-Wave devices from your panel
and searches for another system
from which to import Z-Wave
information.
OPTIMIZING Z-WAVE
DEVICE COMMUNICATION
If your Z-Wave devices aren’t functioning
properly, you may need to update the
communication path between your Z-Wave
devices and your system. Follow these steps
to optimize Z-Wave device communication:
1. Access the user menu and press
CMD until ZWAVE SETUP? appears,
and then press any select area.
Press CMD to cycle through the
Z-Wave options and press OPT.
2. The system displays the names of
your connected Z-Wave devices
and updates the communication.
3. When the update is complete
the system displays OPTIMIZE
SUCCESS.

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English