20 XTLtouch System User Guide | Digital Monitoring Products, Inc.
WHAT IS A USER CODE?
A user code is made up of the following
elements:
• USER NUMBER: Each user on your
system is assigned a number (1–99).
This number identifies them to the
system and can be transmitted to
the Emergency Monitoring Station
when they arm or disarm the system.
• USER CODE: Each user also has a
four-digit user code. They enter this
code when they disarm the system
from the keypad or app.
• USER NAME: The user’s name.
• AUTHORITY LEVEL: A user’s
authority level determines which
User Menu options he or she can
access. A user code can be set
to master or standard. Master
users can access the entire User
Menu. Standard users can access
everything except Z-Wave Setup,
Wi-Fi Setup, User Codes, Schedules,
Set Time, and Service Request.
ADDING A USER CODE
1. From the home screen, access User
Codes from the carousel menu.
Enter your user code and press
CMD, then Press ADD.
2. Enter the new user number from
1–99, a four-digit user code, and the
new user name. Press CMD to cycle
through the system prompts.
3. At the CODE NO prompt, enter the
4-digit user code.
4. Enter the new user’s name.
5. At the MASTER screen, leave YES
selected to set the user’s authority
level to master or select NO to set it
to standard. If you selected NO, you
will see the TEMP CODE and ARM
ONLY options.
• If TEMP CODE displays,
select YES to assign a
number of days for the
user code to be active
(1–250 days). At the end of
this period, the user code
expires.
To Next Page
Loading...
Need help?
General
