32 XTLtouch System User Guide | Digital Monitoring Products, Inc.
5. At the OUTPUT NO: – display,
enter the output number you want
to program. Press CMD.
6. The screen displays SUN MON TUE
WED. Press the CMD key to display
THU FRI SAT. Select the day that
you want to set up a schedule on.
7. The keypad displays TURN ON AT.
Press the second select key or area.
8. Select SUNRISE or SUNSET and
then use the select keys or areas
below the - and + to set an oset
time. Choose from 5, 10, 15, 30,
45, or 60 minutes before or after
sunrise or sunset.
9. Press CMD.
10. The keypad displays TURN OFF AT.
Press the second select key or area.
11. Select SUNRISE or SUNSET and
then use the select keys or areas
below the - and + to set an oset
time. Choose from 5, 10, 15, 30,
45, or 60 minutes before or after
sunrise or sunset.
12. Press CMD to save the schedule.
To Next Page
Loading...
