To Next Page

To Previous Page

Turning the mute off for a desired zone from the title/artist information screen:

STEP 1 Pressthe*buttontoaccesstheControlPanelmenusystem.

STEP 2 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Vol-

umeControl,thenpressthe*button.

STEP 3 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on the

desiredzone,thenpressthe*button.EnteringtheVolumeControlmenuoptionfortheselectedzone

will restore the previously set volume level for the zone.

STEP 4 Pressthe*buttontoexittheVolumeControlmenuoption.

Standby Mode

If it is necessary to stop playback on all zones immediately, press the Standby button once.

The music from all zones will fade down as your ProFusion iS enters Standby Mode. When your ProFusion iS is

in Standby Mode, all functionality remains active but all zones will stop playback.

ToresumeplaybackonallzoneswheninStandbyMode,pressthe*button.YourProFusioniSwillre-enter

Playback Mode with the appropriate scheduled styles playing on all zones. To shut down your ProFusion iS

from Standby Mode, press the Standby button again.

Note: If your ProFusion iS is congured for Network update, it will update at its scheduled time while in

Standby Mode.

Messaging

If your ProFusion iS is configured to utilize Messaging, the playback of messages will be scheduled to play

at specific times and days. Changes to Messaging, including scheduling, should be configured by DMX for

your ProFusion iS. If necessary, the Message Control menu option will allow you to suspend a message

immediately.

Message Control

Turning messages on or off from the title/artist information screen:

STEP 1 Using the NAVIGATION UP or NAVIGATION DOWN button, change the title/artist information display-

ing on the LCD control panel, to zone with the message that you would like to play.

STEP 2 Pressthe*buttontoaccesstheControlPanelmenusystem.

STEP 3 Press the NAVIGATION DOWN button until the current line indicator (>) is on Messaging Control, then

pressthe*button.

STEP 4 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Mes-

sageControl,thenpressthe*button.

Note: If “No Messages” is displayed, there are no messages available for that zone.

DMX ProFusion iS User Manual

Other manuals for DMX ProFusion iS