13
Viewing the Network Settings
The View Settings menu option displays the current network configuration for your ProFusion iS. This includes
the IP type (DHCP or Static), IP address, subnet mask, default gateway, and the IP address of the FTP server
your ProFusion iS will connect to for updates.
Viewing the network settings from the title/artist information screen:
STEP 1 Pressthe*buttontoaccesstheControlPanelmenusystem.
STEP 2 Press the NAVIGATION DOWN button until the current line indicator (>) is on Network Control, then
pressthe*button.
STEP 3 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on View
Settings,thenpressthe*button.
STEP 4 Press the NAVIGATION UP or NAVIGATION DOWN button to scroll through the settings.
STEP 5 Press the NAVIGATION LEFT button to return to the previous menu option and the NAVIGATION RIGHT
button to exit to the title/artist information screen.
Modifying the network settings incorrectly will likely render your ProFusion iS unable to connect
for updates. Proceed only at the direction of your network administrator or DMX.
Changing the IP Type
Changing the IP type from the title/artist information screen:
STEP 1 Pressthe*buttontoaccesstheControlPanelmenusystem.
STEP 2 Press the NAVIGATION DOWN button until the current line indicator (>) is on Network Control, then
pressthe*button.
STEP 3 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set
Conguration,thenpressthe*button.
Note: The Set Conguration menu option requires an unlock code. If access to the Set Congura-
tion menu option is needed, contact DMX Customer Service.
STEP 4 Press the NAVIGATION UP or NAVIGATION DOWN button until the current line indicator (>) is on Set IP
Type,thenpressthe*button.
STEP 5 Press the NAVIGATION UP or NAVIGATION DOWN button to toggle between DHCP and Static and press
the*buttontoselectthedesiredtype.
It is highly recommended that a connectivity test is performed after changing any network settings.
See Testing the Network Settings for instructions.