DNP DP-DS620 - 2.2.5 Color Adjustment

22
Dai Nippon Printing Co., Ltd.
[DP-DS620/DP-DS620 (A) Printer Driver] User’s Manual (For Windows 7, 8)
2.2.5 Color Adjustment
If the Handled by Driver check box is selected in the 2.2.4 Option, the adjustment values of the Color Adjustment tab
are applied to the image.
The following section shows the setting ranges on the Color Adjustment tab.
Adjustment item
Adjustment value
Gamma
-100 (dark) to 100 (bright) (“0” results in no adjustment, γ2.0 to 0.5)
Adjust the density of the half-tone section of the image. Increasing the gamma value brightens
the half-tone section.
Sync check box
ON: Set RGB to same value.
OFF: Set RGB to different value.
Brightness
-100 (dark) to 100 (bright) (“0” results in no adjustment)
Adjust the brightness of the image. Increasing the brightness value brightens the entire image.
Sync check box
ON: Set RGB to same value.
OFF: Set RGB to different value.
Contrast
-100 (weak) to 100 (strong) (“0” results in no adjustment)
Adjust the contrast of the image. Increasing the contrast value increases the difference of
brightness and darkness.
Sync check box
ON: Set RGB to same value.
OFF: Set RGB to different value.
Chroma
-100 (weak) to 100 (strong) (“0” results in no adjustment)
Adjust the chroma of the image.
Fig 2.2.5 Color Adjustment tab