56
one of the boat’s fixed stations for example, then you can take back command on your Dockmate
remote by shortly pressing the “sel” button.
To take command, depending on your boat’s control systems, all or a subset of the
following conditions must be met:
• The Receiver and remote must be powered on.
• Dockmate must support take command on your engine and/or thruster control
system. Ask your Dockmate dealer or technician if take command is supported on
your systems.
• Control heads on all stations must be in neutral.
• Engine(s) is/are running
If Take Command is not supported on your controls, then you must manually take
command on the station, where Dockmate is connected, before you can use your
Dockmate remote.
To Next Page
Loading...
