Dockmate SINGLE - Page 60

58
Problem
Possible cause
Solution
Code 1 – 1
Remote “link” LED or
Receiver Status LED:
1x followed by 1x
Thruster(s): no command.
Check if thruster system is on and
operational. Can You control the
thrusters from the thruster control
panel on the dashboard?
Code 1 – 2
Remote “link” LED or
Receiver Status LED:
1x followed by 2x
Engine(s): no command.
Check if the engine system is on
and operational. Are all control
head levers in neutral?
Depending Your boat and
Dockmate configuration You may
first need to manually take
command on the fixed station,
where Dockmate is connected.