Dockmate SINGLE - Page 63

61
Problem
Possible cause
Solution
Code 3 – 3
Remote “link” LED:
3x followed by 3x
Receiver Status LED:
3x followed by 3x
Configuration Problem:
Dockmate settings are not
configured correctly.
Call Your Dockmate technician to
setup all necessary settings.
Code 3 – 4
Remote “link” LED:
3x followed by 4x
Receiver Status LED:
3x followed by 4x
Interface(s) in the Receiver failed
to start: Device stuck in bootloader
mode.
Call Your Dockmate dealer.