114
114
6.4 Location of BI 5910 and aerial
The multifunction safety module with radio control must be installed as near as possible to or
inside the control cabinet.
The BI 5910 must be protected against shocks an weather influences
The aerial must be installed outside the cabinet and in max possible distance to class 3 wires
and load equipment (power supplies, motors, inverters) and in an area that is useful for a radio
receiver. If necessary an extension cable (RE5910/042 or RE5910/043 can be used.
The aerial is installed slightly above the operator using the remote control. No metal screen
must be between operator and aerial.
The aerial is directed to the working area of the remote control (on a bridge crane downwards).
Good Good Bad
6.4 Location of BI 5910 and aerial
The multifunction safety module with radio control must be installed as near as possible to or
inside the control cabinet.
The BI 5910 must be protected against shocks an weather influences
The aerial must be installed outside the cabinet and in max possible distance to class 3 wires
and load equipment (power supplies, motors, inverters) and in an area that is useful for a radio
receiver. If necessary an extension cable (RE5910/042 or RE5910/043 can be used.
The aerial is installed slightly above the operator using the remote control. No metal screen
must be between operator and aerial.
The aerial is directed to the working area of the remote control (on a bridge crane downwards).
Good Good Bad
To Next Page
