Dolmar PS-6400 - Brake Band Replacement Procedure

12Repair Manual PS-6400/PS-7300/PS-7900
1
3
(1,5 Nm ± 0,2)
2
Replacing the brake band
Loosen screw 2.
Lever brake band 1 out of the housing and turn it
90° to disengage it from the lug 3.
Check the inside of the brake band for signs of wear.
The chain brake is an important safety
component. Always check it for wear.
A worn brake band must be replaced
(927.408.000)!
Tool
03 CHAIN BRAKE