What to do if the Dolphin Handhelds Status LED flashes red without a battery?
If the red LED is flashing without a battery, it means the slot hasn't reset after a faulty battery was removed. To fix this, insert a known good battery into the slot or power cycle the QuadCharger. This should reset the slot and stop the flashing.
Why is the Status LED on my Dolphin 99EX lighting red during charging?
A red Status LED during charging indicates a problem either with the battery pack or the charging circuitry. If the red light persists, try charging the battery in another charging slot to determine the source of the problem.
How to troubleshoot a Dolphin 99EX Handhelds when the Status LED doesn't turn on after inserting the battery pack?
If the Status LED doesn't come on when you insert a battery pack, check the power connections. Ensure the power cable is properly inserted into the power supply connector and that the battery pack is correctly seated.
General| GPS | Integrated GPS |
|---|---|
| Connectivity | USB 2.0, RS-232 |
| Operating System | Windows Embedded Handheld 6.5 |
| Flash Memory | 1 GB |
| Internal Storage | 1 GB Flash |
| Expandable Storage | MicroSD card slot (supports up to 32GB) |
| Display | 3.7 inch VGA 480 x 640 |
| Touch Panel | Yes |
| Wireless Connectivity | Wi-Fi 802.11 a/b/g/n, Bluetooth |
| Camera | 3.1 MP color camera with flash |
| Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Drop Specification | 6 ft (1.8 m) to concrete |
| Sealing | IP64 |
| Audio | Integrated microphone and speaker |
| Keypad | Numeric or QWERTY |
Information regarding laser safety standards and label locations for the terminal.
Details on LED safety classifications and warnings for the device.
Information on UL and C-UL listing and compliance statements for the product.
Step-by-step guide for installing the main battery pack and initial setup procedures.
Explains soft reset, hard reset, and factory reset procedures for the terminal.
Information on how to put the terminal into and wake it from Suspend Mode.
Details standard configurations for 99EX and 99GX models.
Diagram and description of the front panel features of the 99EX and 99GX models.
Diagram and description of the back panel features of the 99EX and 99GX models.
Description of features found on the left and right side panels of the devices.
Overview of battery types, power management, and charging.
General guidelines for the safe use and disposal of batteries.
Step-by-step guide for installing a microSD or microSDHC memory card.
Explains full-area imaging and Advanced Linear Decoding (ALD) for barcode reading.
Guidance on aiming patterns and beam adjustments for optimal barcode scanning.
Instructions on how to capture images using the terminal's camera.
Step-by-step guide to taking pictures using the Camera Demo tool.
How to set the system clock, date, time, and schedule alarms.
Customizing buttons and setting SIP options via the Personal Menu.
Accessing and altering system parameters via the System Menu.
Customizing backlight functionality for the display, including timeouts and intensity.
To Next Page