Dometic PGD1 - Factory Settings; Initialization

33
EN
VARC Chiller Controls Operation
The Factory menu requires the factory password, which is available only to authorized Dometic personnel.
Initialization
Erase user settings and install global default value Yes/No
Clear all saved data Factory + User Yes/No
Insert New Passwords
User ####
Technician (PW1) ####
Factory (PW2) ####
I/O Configuration
See Figure 32
Factory
Configuration
I/O Configuration
Factory Settings
Initialization
Factory Settings
See Figure 28
Configuration
Temperature Units °F/°C
Pressure Units psi/bar
Force clock enable Yes/No
Clock mode 24h/12h
Disable Buzzer Yes/No
Startup delay ### s
Enable Unit by
Digital Input On/Off
Supervisor On/Off
pLAN network On/Off
Schedule On/Off
Unit Control
Custom 1 On/Off
Custom 2 On/Off
Custom 3 On/Off
Custom 4 On/Off
Analog Input Filtering
Enable Yes/No
Input 1 ## s
Input 2 ## s
Input 3 ## s
Manual Control Reset
Enable Yes/No
Time # m
PW/Return Delay ### s
Schedul
er
Holidays No. ##
Modbus Settings
1st Master
Baudrat e #####
Stop bit 1/2
Parity Mode None/Even/Odd
Evo Configurator
Power+ n 1
Power + n1
See Figure 30
EVO Configuration
See Figure 29
27 Program/Factory