MODES OF OPERATION Smart Touch Cabin Control Installation & Operations Manual
20 L-3380 ENGLISH
Figure 31: Smart Touch Sleep
Mode Settings Text Color Edit
d. Sleep Mode Text Color Allows the text color during the Sleep Mode to
be changed. There are 126 different colors to choose from.
Figure 32: Smart Touch
Download Custom Logo
e. Download Custom Logo This option is normally grayed out unless the
Smart Touch detects that the special programming cable is plugged into
its 8-pin jack (i.e. it is not plugged into a control board). There is a PC
program called the “SmartTouch Downloader” that enables selection of
a 24-bit bitmap file (BMP) and transmission to the Smart Touch.
Instructions for this PC program are provided separately.
Figure 33: Smart Touch
System Menu Display Lock
4. Display Lock Allows to modify any of the Display Lock Settings. The
available Display Lock Settings to modify are below.
Figure 34: Smart Touch Display
Lock Invalid PIN Message
a. Set Access Locked by Pin Lets you set a security PIN to access the
display based on the levels configured. When the icon is pressed, the
configured PIN will be requested. Once the PIN is entered, access to all
levels is allowed. The PIN entry will be required again if the system
enters sleep mode and the level at which the PIN is required is
accessed again. The PIN entry will also be required again if this level
setting is changed or if the display is AC power cycled.
To Next Page
Loading...
