Domino D320i Red User Manual

HEALTH & SAFETY
1-14 L025317 Issue 5 July 2014
Specific Precautions During Maintenance or
Repair Work
D-Series laser marking systems are Class 4.
In order to eliminate any danger to the operators, and in accordance with
the conditions of laser protection Class 1, the laser beam must always be
kept inside suitable guarding.
During maintenance or checks, laser radiation dangerous to persons can
become directly accessible. Persons within the dangerous work area must
undertake protective measures. Of particular importance is:
• Always wear protective goggles approved in the user’s country whilst
working
• Never look directly into the Laser beam (not even, when wearing
protective goggles)
• Never expose skin to laser radiation
• Never insert flammable materials into the radiation beam
Laser protective goggles, approved for the respective intended purpose
can be ordered from Domino (pt. No. L007761).

Domino D320i Red Specifications

General

Print Technology	Thermal Transfer
Operating Temperature Range	5°C to 40°C
Ribbon Width	4.33" (110mm)
Ribbon Length	300 m (984 ft)
Connectivity	USB, Ethernet, Serial