10 of 27 PSS5000/INGU/805799/09
PSS 5000 – Installation Guide
2 Installing the PSS 5000 Forecourt Controller
Methods of Setting the IP address of the LAN Port
The IP address for Port 41 on the CPB539 can be set in one of two ways:
• To assign an IP address to Port 41 (via a browser)
• To assign an IP address to Port 41 (via Local Service Panel)
To ensure that the TCP/IP information provided for Port 41 is correct, you
should obtain the necessary details from your System Administrator before
you start.
See Also
• ‘IP Address Assignments’ on page 9
To assign an IP address to Port 41 (via a browser)
This procedure describes how to assign an IP address to Port 41 using a
browser and the FCC Web Application.
1. Use standard Windows procedures to set the IP address of the Ethernet
port on your Service PC to
192.168.42.10.
This makes it compatible with the fixed IP address assigned to Port 42.
To Next Page
Loading...
Need help?
General
