11
Donaldson Company, Inc.
Step 6
Step 7
Step 9
Step 10
Step 8
Step 5
5. Rest banded EZ Filter Pack on shaker bar.
6. Cut and remove bands and cardboard protectors.
7. Insert one hand midway under each side of the
EZ Filter Pack. Push EZ Filter Pack to bottom of
cabinet filter frame.
8. Important - place one hand under center of EZ
Filter Pack. Holding EZ Filter Pack against bottom of
cabinet ledge, push each slide latch over cabinet
ledge.
Do not tighten wing screws at this time.
9. Adjust EZ Filter Pack for good fit. Finger tighten wing
screws.
10. Remove support bar from box.
To Next Page
Loading...
