Donaldson Torit 64 User Manual

Models 54-84 Shown
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This manual is property of the owner. Leave with the collector when set-up and start-up are complete. Donaldson Company reserves the
right to change design and specifications without prior notice.
Illustrations are for reference only as actual product may vary.
Cabinet Collector
Series 50-90
Models 54, 64, 66, 75, 81, 84, 90
Installation and Operation Manual
Installation, Operation, and Service Information
IOM 7509401 (ENG)
Revision 6
English
Master Language

Donaldson Torit 64 Specifications

General

Brand	Donaldson Torit
Model	64
Category	Dust Collector
Language	English

Summary

Description

Purpose and Intended Use

Rating and Specifications

Operation

Normal Operation

Explains the airflow path and dust collection process during normal operation, detailing dirty-air inlet to clean-air outlet.

Filter Cleaning

Describes the manual filter cleaning procedure using the shaker pedal, detailing the six-time action.

Inspection and Installation Procedures

Installation Codes and Procedures

Installation and Foundation

Installation Safety

Foundations or Support Framing

Site Selection and Handling

Collector Location

Rigging and Hoisting Information

Standard Equipment and Electrical

Anchor Bolt Recommendations

Electrical Wiring

Outlines safety and compliance requirements for electrical installation, emphasizing qualified electricians and NEC standards.

Preliminary Start-Up

Maintenance and Filter Procedures

Operational Checklist

Filter Removal and Installation

Details safety precautions and procedures for removing and installing filter elements, noting filter weight.

Filter Pack Maintenance

Describes the daily procedure for cleaning filter packs using the shaker mechanism and emptying the dust drawer.

EZ Filter Pack Procedures

EZ Filter Pack Removal

Step-by-step instructions for removing EZ filter packs from Models 54-84, including loosening screws and latches.

EZ Filter Pack Installation

Step-by-step instructions for installing EZ filter packs into Models 54-84, focusing on proper seating and latching.

Model 90 Filter Removal

Model 90 Filter Installation

Dust Disposal

Optional Equipment: Hopper

Hopper Access Safety

Optional Equipment: Drum and Pail Packs

Optional Equipment: Hopper Attachments

Ductwork Connection

Magnehelic Gauge Installation

Optional Equipment: HEPA Filter (Models 60 & 70)

Optional Equipment: HEPA Filter (Model 80)

Troubleshooting

Fan Blower and Motor Issues

Addresses common problems with fan motor starting and running, listing causes and remedies.

Insufficient Airflow