1
Donaldson Company, Inc.
Combustible materials such as buffing lint, paper, wood, metal dusts, weld fume, or flammable
coolants or solvents represent potential fire and/or explosion hazards. Use special care when
selecting, installing, and operating all dust, fume, or mist collection equipment when such combustible
materials may be present in order to protect workers and property from serious injury or damage due to a
fire and/or explosion.
Consult and comply with all National and Local Codes related to fire and/or explosion properties of
combustible materials when determining the location and operation of all dust, fume, or mist collection
equipment.
Standard Donaldson Torit equipment is not equipped with fire extinguishing or explosion protection systems.
Cabinet Series 50 to 90 dust collectors are self-
contained, intermittent-duty collectors with envelope-
style filters. The Cabinet series collectors provide highly
efficient, low maintenance air cleaning. Filters are
cleaned using the standard manual filter shaker.
Designed to increase the versatility of the collector,
standard options include a dust drawer, hopper
package for a 5-gallon pail or 55-gallon drum, indoor
and outdoor exhaust deflectors, HEPA filter packs,
and exhaust silencers. Four filter media choices and
three construction options are among the many options
available to customize the collector to the specific
application.
Cabinet collectors provide excellent efficiency on
nuisance dust generated in industrial operations and are
a good choice for low airflow, light-load applications that
do not require continuous airflow. Typical applications
include grinding, buffing and polishing, abrasive blasting,
batch mixing, and bag dumping. Often, individual Cabinet
collectors are dedicated to one or two machines.
Four filter media selections offer a wide variety of
characteristics: cotton sateen is the standard media
and provides good efficiency in applications up to 180°F;
polyester sateen provides the same efficiency, but has
higher temperature resistance (240° F) and is more
abrasion-resistant; woven polyester provides better
dust release capabilities with lower efficiency; and
polypropylene provides some chemical resistance up to
180° F.
Note: Standard collectors (Models 54-90) are
limited to 150°F because of internal blower
motor.
Description Purpose and Intended Use
To Next Page
Loading...
