A Series Diesel Engine Base Engine Components 172
z Main Bearing Bore Diameter
Standard: 50.0 to 50.045 mm
[1.9685 to 1.97 in]
z Camshaft Bore Diameter (Maximum)
Standard: 45.03 to 45.06 mm
[1.773 to 1.774 in]
z Tappet Bore Diameter
Standard: 14.26 to 14.28 mm
[0.561 to 0.562 in]
Cylinder Bore
z Cylinder Bore Diameter
Standard: 88.0 to 88.02 mm
[3.464 to 3.465 in]
z Out of Round
0.34mm [0.0012 in]
To Next Page
Loading...
