Operating & Maintenance Manual Options
122
Options - Lubricator
(For units manufactured in North America)
Safety
Ensure that the lubricator filler cap is re-tightened correctly after
replenishing with oil.
Do not replenish the lubricator oil, or service the lubricator without first
making sure that the machine is stopped and the system has been
completely relieved of all air pressure (Refer to STOPPING THE UNIT in
the OPERATING INSTRUCTIONS section of this manual).
If the nylon tubes to the lubricator are disconnected then ensure that
each tube is re-connected in its original location.
General Information
Oil capacity:
1 QT Option-0.95 Litre (1qt)
2 QT Option-1.9 Litre (2qts)
Oil specification:
Refer to the Tool Manufacturer's Manual.
To Next Page
Loading...
