Lubrication Operating & Maintenance Manual
73
Symptom Problem Solution
Battery uses too much
Water
Cracked battery case.
Check for moisture and replace
as necessary.
Defective battery. Test battery.
Battery charging rate too high. Test charging system.
Batteries will not charge Loose or corroded connections. Clean and tighten connections.
Sulfated or worn-out batteries.
See your authorized servicing
dealer.
Stretched poly-vee belt or
defective belt tensioner.
Adjust belt tension or replace
belts.
Starter will not crank PTO engaged. Disengage PTO.
Loose or corroded connections.
Clean and tighten loose
connections.
Low battery output voltage.
See your authorized servicing
dealer.
Faulty start circuit replay.
See your authorized servicing
dealer.
Blown fuse Replace fuse.
Starter cranks slowly
Low battery output.
See your authorized servicing
dealer.
Crankcase oil too heavy. Use proper viscosity oil.
Loose or corroded connections.
Clean and tighten loose
connections.
Entire electrical system
does not function
Faulty battery connection. Clean and tighten connections.
Sulfated or worn-out batteries.
See your authorized servicing
dealer.
To Next Page
Loading...
