Doran 8000 - Start Up Zero (S.U.0)

DORAN MODEL 8000
OPERATING AND SERVICE MANUAL
MAN0002-42 of 33
13
When the d.b.P parameter is selected, press the Print pushbutton to toggle the hSh
function on and off. "Clear To Send" is a signal used by some serial communications
devices such as printers to control data flow.
3.4.12 Convert Select Operation (CSL)
Function Option Description
CSL C A Convert all
LGO 3-way convert, lb-kg(g)-oz
LG 2-way convert, lb-kg(g)
L O 2-way convert, lb-oz
GO 2-way convert, kg(g)-oz
The Convert Select parameter is used to select how the CONV pushbutton operates
when enabled. The pushbutton can operate in a 4, 3, or 2 way configuration.
3.4.13 Metric Display Unit (SLU)
Function Option
Description
SLU kg Display in kilograms
g Display in grams
The Metric Display Unit is used to select whether the scale will display in kilograms or
grams when the "kg" annunciator is illuminated.
3.4.14 Start Up Zero (S.U.0)
Function Option
Description
S.U.0 --0 Auto zero upon power up
CL0 Restore calibrated zero point
Pb0 Restore the last pushbutton zero
The Start Up Zero parameter selects whether the scale will auto zero upon the power
up of the unit.
If the scale is set for a "Legal for Trade" mode, this parameter is ignored and the unit
will always zero upon power up. Otherwise, the unit will only zero upon power up if the
"--0" option is selected.
If the "CL0" option is selected, then the calibrated zero point is reloaded as the zero
point when the scale is first turned on. This option is useful when the scale is calibrated
to an empty vessel and the gross weight in the vessel is to be displayed all the time,
even when the scale is turned off and turned back on.
If the "Pb0" option is selected, the scale will reload the last point that the scale was
zeroed at when the scale is first turned on. This option is useful in cases where the
scale shuts off before the weighing cycle is complete and weight is still on the platform.
The scale will power up displaying the gross weight that is on the platform.