Doran 8000 - Using the 8000; Front Panel Controls and Indicators

DORAN MODEL 8000
OPERATING AND SERVICE MANUAL
MAN0002-42 of 33
14
3.4.15 Motion Aperture (MA)
Function Option Description
MA 1 1 division of change before motion
3 3 divisions of change before motion
5 5 divisions of change before motion
The Motion Aperture is used to select how many displayed divisions of motion must be
sensed before the unit will go into a motion state. If a "Legal for Trade" mode is
selected, the scale will default to 1 division for the motion aperture.
3.4.16 Print Format (PFt)
Function Option
Description
PFt 1 Weight, "grs/net" label
2 Weight only
3 Weight, "grs/net" label,Tare
4 DGH output for analog output
5 A&D printer format output
6 Data string for SSP/DLP printer
4. USING THE 8000
4.1 FRONT PANEL CONTROLS AND INDICATORS
4.1.1 Pushbutton Functions
TARE - Press and release to enter a tare. The tare value will be entered
and switch the 8000 to net mode.
Press and hold for two or more seconds to clear and return the
8000 to the gross mode.
ON/RESTART - Press and release to turn the 8000 on.
Press and hold for 2-3 seconds to turn off.
ZERO - Zeros the scale. Active only in the gross mode.
See details below concerning Legal for Trade operation of the
ZERO function.
CONV - Changes the weight display unit each time it is pressed.
The sequence is lb-kg(g)-oz-lb & oz.
PRINT - Causes the data interface to transmit weight data.