DORMA AUTOMATICES, Inc. 924 Sherwood Drive Toll-Free: 877-367-6211 Subject to change without notice
DL3463-050 08/2016 Lake Bluff, IL 60044 Fax: 847-249-3999
ED100 / ED250 SERVICE MANUAL
—
10
B. Operator environment and cleaning
1.1 Verify ED100 / ED250 system environment meets listed
requirements.
Ambient temperature 5 to 122° F [-15 to 50° C]
Suitable for dry rooms only Relative humidity maximum
93%, non-condensing
1.2 Area around door(s) and door(s) swing radius
Area around door(s) and door(s) swing radius must
be kept clear of all obstacles!
2.1 Cleaning
Cleaning must only be performed with door in OFF
position. This can be done by setting Power switch
on end of operator to OFF position (green LED goes
out), and / or by setting 115 VAC ED100 / ED250
branch circuit disconnect to OFF position.
3.1 External surfaces of ED100 / ED250 operator system
can be cleaned with a damp cloth and with commercial
cleaning agents.
Abrasive (scouring) agents should not be used, as
they may damage system surfaces.
3.2 Water and other liquids
No water or other liquids must be sprayed or spilled
onto or into ED100 / ED250 operator!
3.3 Metal objects
Electric shock hazard! Never place metal objects
into operator openings!
1
Green
Power switch
Yellow
Red
2
3
A hazard area of all swing doors (including those
which are manually operated).
To Next Page
Loading...
Need help?
General
