TABLE OF CONTENTS
—
ED100 / ED250 Service Manual
1 Document information 3
2 Operator system 4
3 Safety 5
4 Door signage – power operated pedestrian doors 6-7
5 Door signage – low energy doors 8
6 Maintenance
A. Safety checks and inspection 9
B. Operator environment and cleaning 10
C. Maintenance 11
D. Cover removal – accessing user interface 12
7 User interface 13
8 Internal program switches – single door 14
9 Internal program switch – double doors 14
10 System accessories – electrical interface 15
11 Measure and record reveal depth and door width 16
12 Set spring tension 17
13 Performing learning cycle 18
14 Door measurements – Power operated pedestrian door 19
15 Door measurements – Power assist and low energy power operated doors 20-21
16 Firmware versions 22
17 Changing parameters 22
18 Parameterization / service
List of parameters 23
Parameter detail 24-32
19 Diagnosis / troubleshooting
Overview, user interface
"ln" codes, EO to "E9" error message memory
33
Error message memory, LED status and error "E_ " codes 34
Troubleshooting charts 35-38
20 Operational topics 39-40
21 Quick start guide 41