Dormakaba ES 400 PRO - UKCA Declaration of Conformity; UKCA Declaration of Incorporation

19
WN 059666 45532 - 07/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Operating instructions
10 UKCA Declaration of Conformity
This declaration is issued under the sole responsibility of the manufacturer.
dormakaba Deutschland GmbH, DORMA Platz 1, 58256 Ennepetal, Germany
declares that the products
ES 250 PRO, ES 250 PRO FST, ES 250 PRO T, ES 250 PRO T FST, ES 400 PRO, ES 400 PRO FST,
ES 400 PRO T, ES 400 PRO T FST, ES 500 PRO, ES 250 PRO EASY, ES 250 PRO EASY T
comply with the provisions of the applicable legislation and the designated standards of the United
Kingdom.
UK legislation:
• Electromagnetic Compatibility Regulations 2016
• RoHS, The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Regulation 2012
Designated standards:
EN 13849-1:2015 EN ISO 12100:2010 EN 16005:2012/AC:2015 EN 60335-2-103:2015
EN 61000 - 6 – 2:2005 EN 61000 - 6 – 3:2007/A1:2011 EN 61000 - 3 – 2:2014 EN 61000 - 3 – 3:2013
EN IEC 63000:2018
System components:
Expansion modules:
Safety and activation (SIAK), operating mode switch (BAS), input/output (I/O)
11 UKCA declaration of incorporation
This declaration is issued under the sole responsibility of the manufacturer.
dormakaba Deutschland GmbH, DORMA Platz 1, 58256 Ennepetal, Germany
declares that the partly completed machinery
ES 250 PRO, ES 250 PRO FST, ES 250 PRO T, ES 250 PRO T FST, ES 400 PRO, ES 400 PRO FST,
ES 400 PRO T, ES 400 PRO T FST, ES 500 PRO, ES 250 PRO EASY, ES 250 PRO EASY T
complies with the basic requirements of the following sections of the Supply of Machinery (Safety)
Regulations 2008 - Annex I:
1.1.3, 1.1.5, 1.2.1, 1.2.3, 1.2.5, 1.2.6, 1.3.2, 1.3.3, 1.3.4, 1.3.8.1, 1.3.9, 1.5.1, 1.5.2, 1.5.4- 1.5.10, 1.5.16, 1.6.1, 1.6.2, 1.6.3,
1.6.4, 1.7.1.1, 1.7.3, 1.7.4
The partly completed machinery also complies with all relevant provisions of the Electromagnetic
Compatibility Regulations 2016 and the Electrical Equipment (Safety) Regulations 2016.
It can be installed and operated in automatic door control mechanisms in accordance with the Supply of
Machinery (Safety) Regulations 2008, provided that the manufacturer of the systems ensures that all
requirements of the Supply of Machinery (Safety) Regulations 2008 have been met and a UKCA
Declaration of Conformity has been issued.
The specialist technical documentation has been created and is available from the Product Compliance
Manager at product-compliance.dach@dormakaba.com.
It is forwarded electronically to the individual authorities in response to a duly substantiated request.