2
WN 059666 45532 - 07/2023
ES 250 PRO/ES 250 PRO FST
ES 400 PRO/ES 400 PRO FST
Operating instructions
Contents
1 About this document 4
1.1 Contents and purpose 4
1.2 Target group 4
1.3 Other applicable documents 4
1.4 Documents storage 4
1.5 Symbols used 4
1.5.1 Hazard categories 4
1.5.2 More symbols 4
2 Safety 5
2.1 Intended use 5
2.2 Non-intended use 5
2.3 Reasonably foreseeable misuse 5
2.4 Basic warnings 6
2.5 Danger points 7
3 Product description 7
3.1 Operating mode switch 7
3.2 Outside and inside detectors 7
3.3 Safety equipment 8
3.3.1 Main closing edge safety sensors 8
3.3.2 Secondary closing edge safety sensors (optional) 8
3.3.3 Force monitoring 8
3.3.3.1 Force monitoring during the closing movement 8
3.3.3.2 Force monitoring during the opening movement 8
3.4 Automatic adjustment of the hold-open time to the footfall 8
3.5 Door unit behavior in the event of power failure 9
3.5.1 Escape route sliding door 9
3.5.2 Escape route sliding door with FIA locking device 9
3.5.3 Standard sliding door without battery pack 9
3.5.4 Standard sliding door with battery pack 10
3.5.4.1 Emergency open 10
3.5.4.2 Emergency close 10
3.5.4.3 Emergency operation 10
3.5.4.4 The battery mode is not set. 10
3.6 Door Pilot Interface (option) 11
3.7 Fire protection function 11
3.8 Technical data 12
3.9 Optional components 13
3.9.1 Key switch 13
3.9.2 Night/bank activator 13
3.9.3 Emergency stop button 13
3.9.4 Emergency open button (only on escape route sliding doors) 14
3.10 Fault LED on the operating mode switch 14
To Next Page
Loading...
