Version 1.36
02/2004
Contents
1. Introduction and Safety
2. Installation
2.1 Installation requirements
2.2 Installation procedure
2.3 Handing over the machine to the customer
2.4 Dispenser description
2.5 Specifications
3. Faults
3.1 Indications
3.2 Troubleshooting
4. Programming
4.1 Programming by means of the service device
4.2 Programming by means of the operation panel buttons
4.3 Flow chart service device programming
4.4 Flow chart button programming
4.5 Default settings
5. Functions
5A Water system
1. Disassembly and adjustment
A. Boiler replacement
B. Boiler temperature adjustment
C. Heating element replacement
D. Temperature sensor replacement
E. Level sensor replacement
F. Product valves replacement
G. Disassembly of the water inlet valve
To Next Page
Loading...
