AEF-A.DOC 02/2003
10
4.3- WORK START
• Turn the selector switch (1-0-2) to the desired speed, 1
st
or 2
nd
speed (fig. 2).
• Close the safety bars (point 3, fig.3). If you lift up the bars, the machine will stop
immediately.
• Press the start button to start the working cycle and a light will lighten up (fig.2).
• At the end of the working cycle, stop the machine by pressing the red Stop button and the
light on the (start/stop) switch will shut off.
• You may stop the machine at any time, by pressing the red emergency button.
4.4 – HOW TO STOP THE SPIRAL MIXER
There are four different ways to switch off the spiral mixer:
• Lift the safety bars;
• Push the red stop button;
• Push the red emergency stop switch;
• Turn the main switch into position 0.
To Next Page
Loading...
Need help?
General
