AEF-A.DOC 02/2003
4
3.2. – TECHNICAL CHARACTERISTICS
• Steel body.
• Independent electric motors for stainless steel spiral and bowl (except AEF015).
• Belt driven transmission.
• Two speeds on stainless steel spiral.
• Two speeds on stainless steel bowl.
• Safety guard with micro switch.
• Manual and automatic digital control with 50 memories of desired working time (except
AEF015).
• Heavy-duty painting.
3.3 – ELECTRICAL CHARACTERISTICS
• The spiral mixers are 208-240 volts.
• Speed – 900 R.P.M. for 1
st
speed and 1800 R.P.M. for 2
nd
speed.
• Frequency – 60 Hz
• 208-240 volts
• 3 phases
• 4 wires (3 lines+gnd)
3.4 – THE MANUFACTURER IS NOT RESPONSIBLE FOR THE MACHINE’S
DAMAGES IN THE FOLLOWING SITUATIONS:
• Bad use of the machines.
• Using them out of the national laws.
• Problems with electric power.
• Non-authorised changes.
• Deficient upkeep.
• Use of unoriginal parts and products of the machines.
• Not following this manual.
• Repairs made by unauthorised technicians.
3.5 – ELECTRIC INSTALLATION
Doyon’s machines have an electric installation in compliance with the American (ANSI/UL
std. 763), Canadian (CSA std. C22.2 no. 1335.2.14) and European rules.
To Next Page
Loading...
Need help?
General
