AEF-A.DOC 02/2003
19
CHAPTER 6
SAFETY INSTRUCTIONS
6.1 – SAFETY INSTRUCTIONS
• The machine must be used only for the functions that it has been conceived for. Doyon
Equipment will not be responsible for the damages caused by an improper, bad or
irrational use of the machine.
• Before cleaning or doing maintenance, turn the main switch off and unplug it.
• Do not remove security parts of the machine.
• If the machine has inactive security units, do not turn it on.
• The work of the machine may be stopped by using the red stop switch.
• If you detect any damages or bad functions of the machine, turn it off immediately and
call for an authorised technician, otherwise it may cause irreversible damages in the
machine.
• The electric connection must follow the procedures presented in the installation chapter.
6.2 – HAZARDS
1. SPIRAL
The spiral (point 4, fig.3) in movement is the most dangerous part of the machine.
The safety guard does not allow the access to this area (point 3, fig.3). You must not remove
it, damage it or modify it.
2. TRANSMISSIONS
Danger, the transmission must be protected with fixed protections. In order to have access to
them, you must respect the instructions of the manual.
To Next Page
Loading...
Need help?
General
