Dräger Infinity Central Station - Main Screen Layout and Customization

Supplement for Infinity CentralStation Wide
14 Supplement
– Infinity CentralStation Wide – VG2.1.2
Main screen layout
The following illustration shows the Main screen layout dialog, where the user can configure up to four
screen layout views.
To access the Main screen layout dialog:
1 Select System setup... on the Main screen.
2 Select the Main screen layout tab.
3 Next to Select layout, choose Layout 1.
4 In the Name field, enter a custom name to help you identify the layout.
5 Next to Split screen, select On to enable a split screen or select Off to default to a full screen setup.
6 Configure the following options for both Left side and Right side when using Split screen mode, and
for Full screen when Split screen is Off.
– Under Beds, select the number of beds to monitor in the pull-down box (the number of beds may
vary depending on license options).
– Under Parameters, select the number of parameters to display. The number of parameters
allowed is based on the number of beds being monitored.
NOTE
The button with the (*) indicates the layout Name
currently in use and displayed.
WARNING
Modifying layouts in the Main screen layout
tab can remove a previously assigned bed.