Dräger Infinity Delta - Screen Setup;Auto Display

© 2014 Draeger Medic al , Inc .
INFINITY DELTA / KAPPA QUICK REFERENCE GUIDE |19
THIS GUIDE IS INTENDED FOR REFERENCE ONLY. REFER TO INSTRUCTIONS FOR USE MANUAL.ADDITIONAL INFORMATION
Menu Item
Description
Setting
Options
Table Interval
Determines time interval for tabular re-
port. Corresponds to the interval setting
at bottom of the trend table.
1, 5, 15, 30, 60
minutes
Screen Setup/Auto Display
The Main Screen display is determined by Display mode and Pa-
rameter Priority
TO SETUP DISPLAY MODE/ AUTO OR MANUAL DISPLAY
1. Press Main Menu fixed key
2. Use Rotary knob to highlight Main Screen, click
3. Use Rotary knob to highlight Display Mode, click
4. Use Rotary knob to highlight Automatic, click
o Main Screen displays connected parameters according to
Parameter Priority.
5. Use Rotary knob to highlight Manual, click
o Main Screen displays all parameters based on Parameter
Priority
TO SETUP PARAMETER PRIORITY
This option allows one to modify the parameter order on the Main
Screen.
1. Press Main Menu fixed key
2. Use Rotary knob to highlight Main Screen, click
3. Use Rotary knob to highlight Parameter Priority, click
o First listed parameter is highlighted.
o Parameters are number according to their priority.
o Green indicates a device is connected.
o White indicates the device is not connected.
4. Use Rotary knob to highlight parameter you desire to move,
click.