Dräger Infinity M540 - Biomed Setup - Printer Setup; Biomed Setup - Recorder Setup

Instructions for use – Infinity Acute Care System – Monitoring Applications VG6.n 477
System configuration
Biomed setup – printer setup
The following table lists the available settings of the
Printer setup page. To access this page, see
page 470. After making the desired changes, select
the Apply button.
Biomed setup – recorder setup
The following table lists the available settings of the
Recorder setup page. To access this page, see
page 470.
Selection Available settings Description
Printer IP address User selectable Allows you to configure the IP address for
printing reports on a network printer.
HP Universal Print
Driver
Informational only Displays the version of the print driver.
Paper Size Letter, Legal, A4 Allows you to select the printer paper.
Print test page Select the Print screen button, to verify that the printer is working properly.
Selection Available settings Description
Primary Recorder Recorders are available for
selection once they are con-
nected to the network.
Selects a recorder as the primary recorder for
printing recordings.
Secondary Recorder Selects the secondary recorder for printing
recordings when the primary recorder is not
available.