Dräger Interlock 5000 User Manual

16 Dräger Interlock 5000 / 7000
Maintenance
6 Maintenance
6.1 Calibration / Adjustment
 Only by an authorized Dräger Interlock service centre.
 Check calibration at least every 12 months.
 Once the service interval expires the display shows the message
Service due in X days.
 If the unit is not serviced, the vehicle can nevertheless be
started during a transition period of several days (dependent on
the configured parameters).
6.2 Cleaning
 To clean, wipe with a disposable tissue.
 Do not submerge in liquid – liquid must not enter the sockets!
7 Disposal
Dispose of the product in accordance with the applicable rules and
regulations.
7.1 WEEE
8 Technical data
This product must not be disposed of as municipal waste.
This is indicated by the adjacent icon.
You can return this product to Dräger free of charge. For
information please contact the national sales organisations
and Dräger.
Measuring principle Electrochemical DrägerSensor
Measuring range Up to 3.0 mg/L
Ambient conditions
For operation and storage -40 °C to 85 °C
20 % to 98 % r. h.
600 to 1100 hPa
No influence of changes in altitude
on the measurement result
Sensitivity drift Typically 1 % of measured value /
month
Display Display
Calibration interval Typically 12 months
Dimensions (H x W x D)
Handset Approx. 138 mm x 61 mm x 36 mm
Control unit Approx. 148 mm x 90 mm x 32 mm
Weight
Interlock 5000 handset Approx. 180 g
Interlock 7000 handset Approx. 178 g
Control unit Interlock 5000 Approx. 195 g
Control unit Interlock 7000 Approx. 240 g
Voltage supply 12 V to 24 V

Dräger Interlock 5000 Specifications

General

Brand	Dräger
Model	Interlock 5000
Category	Measuring Instruments
Language	English