Dragino LLDS40 User Manual

Uplink:
486.3 - SF7BW125 to SF12BW125
486.5 - SF7BW125 to SF12BW125
486.7 - SF7BW125 to SF12BW125
486.9 - SF7BW125 to SF12BW125
487.1 - SF7BW125 to SF12BW125
487.3 - SF7BW125 to SF12BW125
487.5 - SF7BW125 to SF12BW125
487.7 - SF7BW125 to SF12BW125
Downlink:
506.7 - SF7BW125 to SF12BW125
506.9 - SF7BW125 to SF12BW125
507.1 - SF7BW125 to SF12BW125
507.3 - SF7BW125 to SF12BW125
507.5 - SF7BW125 to SF12BW125
507.7 - SF7BW125 to SF12BW125
507.9 - SF7BW125 to SF12BW125
508.1 - SF7BW125 to SF12BW125
505.3 - SF12BW125 (RX2 downlink only)
2.6.4! AU915-928(AU915)
Frequency band as per definition in LoRaWAN 1.0.3 Regional document.
To make sure the end node supports all sub band by default. In the OTAA Join process, the end node will
use frequency 1 from sub-band1, then frequency 1 from sub-band2, then frequency 1 from sub-band3, etc
to process the OTAA join.
!
After Join success, the end node will switch to the correct sub band by:
•
Check what sub-band the LoRaWAN server ask from the OTAA Join Accept message and switch to
that sub-band
•
Use the Join successful sub-band if the server doesn't include sub-band info in the OTAA Join
Accept message ( TTN v2 doesn't include)

Dragino LLDS40 Specifications

General

Brand	Dragino
Model	LLDS40
Category	Accessories
Language	English