Dragino LLDS40 - Understanding the Interrupt Pin Flag; Decoding LiDAR Temperature Readings

2) When the sensor detects invalid data:
3) When the sensor is not connected:
2.3.5! Interrupt Pin
This data field shows if this packet is generated by interrupt or not.
Click here
for the hardware and
software set up.
Note:
!The Internet Pin is a separate pin in the screw terminal. See
pin mapping
.
Example:
0x00: Normal uplink packet.
0x01: Interrupt Uplink Packet.
2.3.6! LiDAR temp
Characterize the internal temperature value of the sensor.