Dragino LLDS40 - Table of Contents

Table of Contents:
•
1.! Introduction
◦
1.1 What is LoRaWAN LiDAR ToF Distance Sensor
◦
1.2! Features
◦
1.3! Probe Specification
◦
1.4! Probe Dimension
◦
1.5 Applications
◦
1.6! Pin mapping and power on
•
2.! Configure LLDS40 to connect to LoRaWAN network
◦
2.1! How it works
◦
2.2! Quick guide to connect to LoRaWAN server (OTAA)
◦
2.3! Uplink Payload
▪
2.3.1! Battery Info
▪
2.3.2! DS18B20 Temperature sensor
▪
2.3.3! Distance
▪
2.3.4! Distance signal strength
▪
2.3.5! Interrupt Pin
▪
2.3.6! LiDAR temp
▪
2.3.7! Message Type
▪
2.3.8! Decode payload in The Things Network
◦
2.4! Uplink Interval
◦
2.5! Show Data in DataCake IoT Server
◦
2.6! Frequency Plans
▪
2.6.1! EU863-870 (EU868)
▪
2.6.2! US902-928(US915)
▪
2.6.3! CN470-510 (CN470)
▪
2.6.4! AU915-928(AU915)
▪
2.6.5! AS920-923 & AS923-925 (AS923)
▪
2.6.6! KR920-923 (KR920)
▪
2.6.7! IN865-867 (IN865)
◦
2.7! LED Indicator
◦
2.8! Firmware Change Log
•
3.! LiDAR ToF Measurement
◦
3.1 !Principle of Distance Measurement
◦
3.2 !Distance Measurement Characteristics
◦
3.3 !Notice of usage:
◦
3.4! Reflectivity of different objects:
•
4.! Configure LLDS40 via AT Command or LoRaWAN Downlink
◦
4.1! Set Transmit Interval Time
◦
4.2! Set Interrupt Mode
◦
4.3! Get Firmware Version Info
•
5.! Battery & How to replace
◦
5.1! Battery Type
◦
5.2! Replace Battery