DragonLink V3 - 3.5 Receiver Settings and Features

CH1 – X: These drop-down menus allow the assignment of a function to each of the
physical pins on the DragonLink receiver.
NOTE: Analogue RSSI is only selectable on CH8 of the Micro receiver. On
the Advanced (high-power) receiver, there is a dedicated set of pins (CH
13) for this function.
3.5 DragonLink Receiver
The first time you connect your DragonLink receiver to the DragonLink GUI, you may be
prompted to set the receiver type. Ensure that you select this correctly as an incorrect
selection may result in unusable channels.