1.4 Software Updates
For instructions on how to apply software or firmware updates, please see sections 2.3 and
2.4, respectively.
1.4.1 Changelog
An up-to-date changelog for both firmware and software can be found on the
welcome screen of the DragonLink GUI software.
This is version 1.0 of the DragonLink User Guide.
1.4.2 Known Issues and Limitations
When configuring “External connections” on the Transmitter, assigning the same
function to more than one connection will cause one or more of those
connections to not work.
When using MavLink Decoded telemetry, Mission Planner will endlessly attempt
to retrieve parameters. As this is not possible without a bi-directional telemetry
link, the user will need to click “Cancel” to proceed. This is a limitation of Mission
Planner and not a fault with your DragonLink system.
Elements positioned on the DragonLink OSD within the GUI will not always show
the correct location on the FPV video feed. The OSD is still largely under
development.
1.5 Product Support
To Next Page
Loading...