Draminski BLUE - Selection of a Patient from the Database; Ending Examination

DRAMIŃSKI BLUE – user manual
28
8.1.2. Selection of a patient from the database
To start examining a patient who already exists in the database, press [Patient] and select [Browse database].
Enter partial data in the [Patient Name] eld. The system will lter the patient database as you type. As soon as
the patient appears on the list, select his card and press [Use selected patient] to start the examination.
8.1.3. Ending examination
To end the examination, press [Patient] and select [End test]. The system will display the patient database.