Draper FlexShade - Replacing Roller Assembly and Fascia

1. A. Replace Operator End
of Roller Assembly.
A
Please Note: Section 10 (Reinstalling Side Channel Covers) must be completed before replacing the Fascia.
Section 13 - Replacing Roller Assembly and Fascia (If applicable)
Please Note: Fascia and Roller Assembly only require removal if shade is directly mounted to mounting surface.
Removing fascia is OPTIONAL for all other methods of installation.
2. A. Replace
Idler End
of Roller
Assembly.
3. A. Replace Fascia.
B. Replace Quick
Release Pin.
B. Replace screws
on bottom of
Headbox.
page 13 of 16
FlexShade
®
Crank-Operated ZIP